13 Curtain Bang Haircuts For Men To Try Today
1 of 13 — The Soft Part Heartthrob
Face Shape Match
The Soft Part Heartthrob is engineered for Square face shapes. The soft center part and feathered fringe break up the strong horizontal jawline, softening the angularity while the gentle fall of hair across the forehead adds curved lines that counterbalance sharp bone structure. Oval faces also wear it beautifully since there’s no proportion to correct. Round faces should avoid the fullest version of this cut, as the horizontal fringe can add unwanted width to an already circular silhouette — request longer, more vertical layering instead.
Grooming Kit
Clippers: Wahl Magic Clip (Model 5049-400) for the base cut and blending. Trimmer/Outliner: Andis T-Outliner (Model 04710) for cleaning the neckline and edges. Finishing Tools: Kent 81T fine-tooth comb for the center part, Denman boar bristle brush for smoothing flyaways. Styling Product: Layrite Original Pomade (medium hold) — a pea-sized amount worked through damp hair for natural separation. Maintenance: Honest Amish beard oil, 3-4 drops daily for the stubble.
Maintenance Level
Rated LOW to MEDIUM. Barbershop visits every 5-6 weeks keep the fringe length balanced. Daily styling takes just 4-5 minutes — damp hair, comb the center part, apply pomade, air-dry or light blow-dry with a round brush. This cut grows out gracefully for nearly a month before it needs reshaping, making it ideal for low-effort mornings. Monthly maintenance cost sits around $30-45 depending on region. Difficulty rating: Beginner-friendly for home upkeep.
Barber Talk — Say This To Your Barber
“I want a Soft Part Heartthrob with the top left at 3-4 inches, no fade, just a natural taper at the sides with a guard #3 blending into the length. Keep the fringe long enough to fall softly across the forehead and part it down the center with point cutting for a feathered edge. Leave enough weight at the crown so it doesn’t look flat. Trim the neckline with a natural rounded edge, no hard lineup.”
If your face leans more angular, the next style on this list trades the soft romantic fringe for a sharper, face-slimming diamond-cut version that works even better on strong bone structure.
2 of 13 — The Center-Split Charmer
Face Shape Match
Oval faces are the ideal canvas for The Center-Split Charmer since the balanced proportions of an oval face let the sharp, symmetrical part shine without needing correction. Diamond faces also benefit — the fringe softens a prominent cheekbone line by adding horizontal weight at the forehead. Oblong faces should be cautious with this style, since the vertical center part can visually stretch the face further; request more side volume to add width instead.
Grooming Kit
Clippers: Andis Master (Model 01557) for side tapering. Trimmer/Outliner: Andis T-Outliner (Model 04710) for a crisp center part line and edge cleanup. Finishing Tools: Kent 81T fine-tooth comb for precision parting, Denman boar bristle brush for polish. Styling Product: American Crew Fiber (matte finish, high hold) — a dime-sized amount for structured hold without shine. Maintenance: Viking Revolution beard oil for the jawline, even if clean-shaven, to keep skin conditioned.
Maintenance Level
Rated MEDIUM. Barbershop touch-ups every 4 weeks maintain the sharp part line and fringe length. Daily styling takes 6-7 minutes — blow-dry with a comb to set the part, then apply fiber wax for hold. The part loses definition around week 3, requiring a quick refresh with product. Monthly maintenance cost averages $35-50. Difficulty rating: Intermediate for home maintenance due to precise parting technique.
Barber Talk — Say This To Your Barber
“I want a Center-Split Charmer with the top left at 3 inches, tapered sides using a guard #2 blending up to guard #4 near the crown. Part the fringe dead-center and keep it straight with minimal layering so it holds a sharp line. Blend the taper naturally into the sideburns, no hard fade line. Finish with a crisp lineup at the temples only.”
If sharp and symmetrical isn’t quite your vibe, the next style trades the structured part for a wilder, textured fringe that thrives on messy, undone styling.
3 of 13 — The Feathered Curtain King
Face Shape Match
Round faces benefit enormously from The Feathered Curtain King because the flicked, textured ends create diagonal lines that break the circular symmetry of the face, adding the illusion of length and angularity. Heart-shaped faces also do well since the feathering balances a wider forehead. Square faces should approach with caution — the soft feathering can compete with a strong jaw rather than complement it, so keep the fringe shorter and less voluminous.
Grooming Kit
Clippers: Wahl Magic Clip (Model 5049-400) for side and back tapering. Trimmer/Outliner: Andis T-Outliner (Model 04710) for beard-to-hair blend lines. Finishing Tools: Kent 81T fine-tooth comb, Denman boar bristle brush for feathered texture polish. Styling Product: Layrite Original Pomade (medium hold), pea-sized amount, worked from mid-lengths to ends for the feathered flick. Maintenance: Honest Amish beard oil, 3-4 drops daily to keep the full beard soft and connected to the fringe.
Maintenance Level
Rated MEDIUM. Barbershop visits every 4-5 weeks to keep the feathered ends crisp and the beard blended. Daily styling takes 6-8 minutes — towel-dry, apply light product, finger-style the ends outward for the flick. The feathered texture holds its shape well into week 3 before needing a light trim refresh. Monthly maintenance cost around $40-55 including beard trims. Difficulty rating: Intermediate, since the feathered flick technique takes some practice.
Barber Talk — Say This To Your Barber
“I want a Feathered Curtain King with the top left at 3-3.5 inches, sides tapered with a guard #3 blending into a low fade starting just above the ear. Point-cut the fringe ends so they flick outward naturally instead of falling flat. Taper the beard into the fade at the jawline, keeping beard length at 8mm. Finish with texture through the crown using thinning shears for movement.”
If a full beard feels like too much upkeep, the next style pairs the same feathered fringe with a clean-shaven look for a lower-maintenance combo.
4 of 13 — The Wolf Cut Curtain Fringe
Face Shape Match
Diamond face shapes pair exceptionally well with The Wolf Cut Curtain Fringe because the heavy shag layers add width at the temples and forehead, balancing out a narrower jawline and prominent cheekbones. Oval and round faces also handle the texture well since there’s no sharp structure to fight against. Oblong faces should request shorter fringe length, since long shaggy layers can add unwanted vertical drop and further elongate the face.
Grooming Kit
Clippers: Andis Master (Model 01557) for the nape and internal texturizing. Trimmer/Outliner: Andis T-Outliner (Model 04710) for soft, undefined edges — no hard lineup on this style. Finishing Tools: Denman boar bristle brush for tousled texture, wide-tooth comb for detangling waves. Styling Product: sea salt spray plus American Crew Fiber, a dime-sized amount scrunched through damp hair for lived-in texture. Maintenance: leave-in conditioner for wavy hair to prevent frizz between washes.
Maintenance Level
Rated MEDIUM to HIGH due to the layering upkeep, though styling itself is low-effort. Barbershop visits every 6-8 weeks to maintain the shaggy silhouette without losing shape entirely. Daily styling takes just 3-5 minutes — scrunch product into damp or dry hair and let it air-dry into natural texture. The cut actually improves with growth for the first month, then starts losing its wolf-cut silhouette. Monthly maintenance cost around $25-40. Difficulty rating: Beginner-friendly for daily styling, but the initial cut requires an experienced barber.
Barber Talk — Say This To Your Barber
“I want a Wolf Cut Curtain Fringe with heavy layering throughout, top left long at 4-5 inches with lots of internal texturizing using thinning shears. Keep the crown choppy and shaggy, not blended smooth. Fringe should be point-cut for a jagged, undone edge. No hard lineup at the neckline — leave it soft and natural. Sides can stay slightly longer than a typical taper, just enough texturizing to remove bulk.”
If shaggy and undone isn’t your everyday vibe, the next style takes the same low layers but smooths them into a sleek, glossy finish.
5 of 13 — The Textured Curtain Sweep
Face Shape Match
Oblong faces gain the most from The Textured Curtain Sweep since the diagonal, side-swept direction adds width across the forehead and breaks up the vertical length of the face. Square and heart-shaped faces also respond well to the soft matte texture. Round faces should avoid heavy fringe volume swept straight across, as it can visually shorten and widen the face further than desired — ask for a higher side part instead.
Grooming Kit
Clippers: Wahl Magic Clip (Model 5049-400) for side tapering. Trimmer/Outliner: Andis T-Outliner (Model 04710) for beard edge definition. Finishing Tools: Kent 81T fine-tooth comb for the side part, Denman boar bristle brush for smoothing. Styling Product: matte clay such as Reuzel Grey Pomade — a dime-sized amount for a natural, non-shiny finish. Maintenance: Viking Revolution beard oil, 3-4 drops daily.
Maintenance Level
Rated LOW. Barbershop visits every 5-6 weeks. Daily styling takes 3-4 minutes — apply matte clay to damp hair, sweep the fringe to one side with fingers, no blow-dryer required. The style stays fresh for nearly a full month with minimal reshaping needed. Monthly maintenance cost around $30. Difficulty rating: Beginner-friendly, one of the easiest cuts on this list to maintain at home.
Barber Talk — Say This To Your Barber
“I want a Textured Curtain Sweep with the top left at 3 inches, sides tapered with a guard #2 blending to guard #4. Cut the fringe to fall diagonally to one side with texturizing scissors for a matte, non-glossy finish. Keep the part low and natural, not a hard line. Trim the beard to a uniform 5mm and blend it into the sideburn.”
If low-maintenance is your top priority, this is already one of the easiest cuts here — but the next style takes it even further with a wash-and-go silk press finish.
6 of 13 — The Effortless French Curtain
Face Shape Match
Heart-shaped faces suit The Effortless French Curtain beautifully because the soft wave framing balances a wider forehead against a narrower chin, creating visual harmony. Oval and round faces also carry the tousled texture well. Long oblong faces should be cautious with excess fringe length hanging straight down, since it emphasizes vertical length — request shorter, more voluminous waves instead.
Grooming Kit
Clippers: Andis Master (Model 01557) for side blending. Trimmer/Outliner: Andis T-Outliner (Model 04710) for beard lineup. Finishing Tools: wide-tooth comb for wave definition, Denman boar bristle brush for a soft tousled finish. Styling Product: sea salt spray for texture plus a light-hold cream like Baxter of California — a pea-sized amount scrunched through damp hair. Maintenance: Honest Amish beard oil, applied nightly.
Maintenance Level
Rated LOW. Barbershop visits every 6 weeks since the tousled style is forgiving as it grows. Daily styling takes just 3-5 minutes — scrunch salt spray into damp hair, let it air-dry naturally. The relaxed texture actually looks better with a few extra weeks of growth. Monthly maintenance cost around $25-35. Difficulty rating: Beginner-friendly, virtually foolproof for home styling.
Barber Talk — Say This To Your Barber
“I want an Effortless French Curtain with the top left at 3.5-4 inches, sides lightly tapered with a guard #3, no hard fade. Cut the fringe with a soft diagonal part and add gentle layering for natural wave movement, no heavy point cutting. Keep the beard at 6mm and blend it softly into the sideburn without a defined line.”
If tousled and relaxed isn’t quite formal enough for your workplace, the next style channels the same fringe energy into a sleeker, office-ready silhouette.
7 of 13 — The Undercut Curtain Drop
Face Shape Match
Square faces handle The Undercut Curtain Drop extremely well because the sharp contrast between the long top and disconnected sides plays into the strong jawline rather than fighting it, creating an intentional, edgy silhouette. Diamond faces also benefit from the added forehead coverage. Round faces should be careful with the heavy dropped fringe, as it can shorten the face further — a slightly shorter fringe length with more height at the crown works better.
Grooming Kit
Clippers: Andis Master (Model 01557) for the disconnected undercut, using guard #0 or #1. Trimmer/Outliner: Andis T-Outliner (Model 04710) for crisp disconnection lines. Finishing Tools: Kent 81T fine-tooth comb for the deep side part, Denman boar bristle brush for smoothing the top. Styling Product: Layrite Original Pomade (medium hold), a dime-sized amount for a controlled but natural drop. Maintenance: Viking Revolution beard oil for the stubble, applied daily.
Maintenance Level
Rated MEDIUM to HIGH. Barbershop visits every 3-4 weeks to keep the undercut disconnection sharp, since the shaved sides grow out faster than the long top. Daily styling takes 5-6 minutes — blow-dry the fringe forward and to the side, then set with pomade. The contrast starts to soften around week 3 as the sides grow in. Monthly maintenance cost around $45-60. Difficulty rating: Intermediate, since maintaining the sharp disconnection at home is tricky.
Barber Talk — Say This To Your Barber
“I want an Undercut Curtain Drop with the top left long at 4-5 inches and a disconnected undercut on the sides using a guard #1, no gradual blend — I want a clear, visible line of separation. Cut the fringe to drop low over the brow with a deep side part. Keep the disconnection line clean around the ears and at the back. Finish with a defined edge at the undercut border.”
If the bold disconnected look feels a little too high-contrast for your daily routine, the next style softens things into a subtler, blended grunge-inspired fringe.
8 of 13 — The Grunge Curtain Fringe
Face Shape Match
Oval faces suit The Grunge Curtain Fringe effortlessly since the flat, natural fall doesn’t need to correct any proportion. Round faces also do surprisingly well, as the low density and uneven ends create visual break-up rather than added roundness. Square faces should request slightly more layering, since a completely flat fringe with no movement can look heavy against strong jaw angles.
Grooming Kit
Clippers: Wahl Magic Clip (Model 5049-400) for the back and nape. Trimmer/Outliner: Andis T-Outliner (Model 04710), used sparingly for a soft, undefined nape edge. Finishing Tools: wide-tooth comb, no brush needed since texture should stay undone. Styling Product: minimal — a light texturizing spray, or none at all for the most authentic grunge finish. Maintenance: basic leave-in conditioner to prevent flat hair from looking greasy.
Maintenance Level
Rated LOW. Barbershop visits every 6-8 weeks since the deliberately undone look is forgiving of growth. Daily styling takes under 3 minutes — towel-dry and go, no product required for the authentic look. The style barely changes as it grows out, which is part of its appeal. Monthly maintenance cost around $20-30, the most budget-friendly option on this list. Difficulty rating: Beginner-friendly, essentially wash-and-go.
Barber Talk — Say This To Your Barber
“I want a Grunge Curtain Fringe with the top left at 3.5 inches, sides barely tapered with a guard #4, minimal contrast. Cut the fringe blunt with slight point cutting for natural unevenness, no heavy layering. Keep the nape loose and unstructured, no hard lineup. I want it to look intentionally undone, not overly styled.”
If zero-effort styling is exactly what you’re after, this is the lowest-maintenance option here — but the next style adds a touch of polish while keeping the same relaxed spirit.
9 of 13 — The Silk Press Curtain Part
Face Shape Match
Round faces are elevated by The Silk Press Curtain Part because the sleek, deep side part with a low fade creates strong vertical lines that visually lengthen the face. Diamond and oval faces also carry the glossy, sharp finish exceptionally well. Square faces can wear it too, but should ask for slightly more volume at the crown to avoid a flat silhouette against strong jaw angles.
Grooming Kit
Clippers: Andis Master (Model 01557) for the low fade. Trimmer/Outliner: Andis T-Outliner (Model 04710) for a crisp part line and beard edges. Finishing Tools: Kent 81T fine-tooth comb for the sharp part, silk press flat iron for the straightening process. Styling Product: a light-hold shine serum, a few drops for gloss without heaviness. Maintenance: silk or satin durag/bonnet at night to preserve the press between sessions.
Maintenance Level
Rated MEDIUM. Barbershop visits every 2-3 weeks to maintain the low fade line, with the silk press itself typically redone every 1-2 weeks depending on humidity and activity level. Daily styling takes 5 minutes — light comb-through and a touch of shine serum. Humidity and sweat are the biggest factors affecting how long the press holds. Monthly maintenance cost around $50-70 including press touch-ups. Difficulty rating: Intermediate to Advanced, since the silk press technique benefits from professional application.
Barber Talk — Say This To Your Barber
“I want a Silk Press Curtain Part with a low skin fade starting just above the ear, blending from a guard #1 up to guard #3 at the parietal ridge. Keep the top length at 3-4 inches for the silk press to lay flat with a deep side part. Line up the part with a razor for a crisp, sharp edge. Taper the beard into the fade at the jawline, keeping the beard length at 5mm.”
If a fully sleek finish feels like too much upkeep for your schedule, the next style trades the glossy press for loose, effortless beach waves.
10 of 13 — The Beach Wave Curtain Fringe
Face Shape Match
Diamond faces are especially flattered by The Beach Wave Curtain Fringe since the loose wave volume softens prominent cheekbones and adds width near the forehead. Oval and heart faces also wear the tousled waves naturally well. Round faces should be cautious with too much volume directly at the front hairline, as it can add unwanted width — keep the waves looser and lower in volume.
Grooming Kit
Clippers: Wahl Magic Clip (Model 5049-400) for side tapering. Trimmer/Outliner: Andis T-Outliner (Model 04710) for beard-to-hair blending. Finishing Tools: wide-tooth comb for wave definition, no brush needed to preserve texture. Styling Product: texturizing sea salt spray, applied to damp hair and scrunched, no heavy pomades that weigh down the wave. Maintenance: Honest Amish beard oil for the full beard, applied nightly.
Maintenance Level
Rated LOW. Barbershop visits every 6 weeks, since natural waves are forgiving as they grow. Daily styling takes 4-5 minutes — scrunch sea salt spray into damp hair and let it air-dry, no heat tools required. The wave pattern actually becomes more defined with a bit of extra length. Monthly maintenance cost around $25-35. Difficulty rating: Beginner-friendly for anyone with naturally wavy hair.
Barber Talk — Say This To Your Barber
“I want a Beach Wave Curtain Fringe with the top left at 4 inches, sides tapered with a guard #3, keeping enough length for movement. Cut the fringe with soft layering to enhance the natural wave pattern, no straight blunt lines. Taper the beard into the fade at the jawline, keeping length at 8mm. Finish with light texturizing through the crown only, no product needed for the demo.”
If natural waves aren’t your hair type, the next style channels that same relaxed spirit into a sleeker, minimalist finish that works on straighter hair.
11 of 13 — The Korean Curtain Bang
Face Shape Match
Oblong faces benefit greatly from The Korean Curtain Bang because the blunt, dense fringe cuts across the forehead at brow level, visually shortening the face and adding much-needed horizontal weight. Heart and square faces also handle the density well. Round faces should avoid the fullest blunt version, since the added forehead coverage combined with dense width can emphasize roundness — request slightly more point-cutting at the ends instead.
Grooming Kit
Clippers: Andis Master (Model 01557) for side and back blending. Trimmer/Outliner: Andis T-Outliner (Model 04710) for a clean-shaven finish. Finishing Tools: Kent 81T fine-tooth comb for precise fringe combing, flat iron on low heat for a smooth blunt edge if needed. Styling Product: light styling cream, a pea-sized amount for control without stiffness. Maintenance: gentle facial moisturizer for the clean-shaven look.
Maintenance Level
Rated MEDIUM. Barbershop visits every 3-4 weeks to keep the blunt fringe edge sharp, since this style relies heavily on precise length. Daily styling takes 4-5 minutes — comb the fringe flat and even, light product for hold. The blunt line softens noticeably after 3 weeks of growth. Monthly maintenance cost around $35-45. Difficulty rating: Intermediate, since maintaining an even blunt edge at home takes a steady hand.
Barber Talk — Say This To Your Barber
“I want a Korean Curtain Bang with the top left at 2.5-3 inches, sides tapered with a guard #3. Cut the fringe blunt and straight across at brow level, dense and even with minimal layering. Keep the sides soft and rounded, not sharp. No hard lineup — I want the whole shape to look uniform and clean.”
If the dense, blunt fringe feels too structured for you, the next style takes inspiration from decades past with a looser, flipped-out finish.
12 of 13 — The Vintage 70s Curtain Flip
Face Shape Match
Heart-shaped faces suit The Vintage 70s Curtain Flip beautifully since the voluminous flipped wings add balanced width at the temples, offsetting a narrower chin. Oval and round faces also carry the retro volume well. Long oblong faces should reduce overall length slightly, since the added body at the crown combined with length can overemphasize vertical proportions.
Grooming Kit
Clippers: Wahl Magic Clip (Model 5049-400) for the nape and back shaping. Trimmer/Outliner: Andis T-Outliner (Model 04710) for beard-to-hair blend precision. Finishing Tools: round barrel brush for the flipped-out finish, blow dryer for volume at the root. Styling Product: volumizing mousse, a golf ball-sized amount for body, finished with a light-hold spray to lock the flip. Maintenance: Honest Amish beard oil for the full beard, applied daily.
Maintenance Level
Rated MEDIUM to HIGH. Barbershop visits every 5-6 weeks to maintain shape and length. Daily styling takes 8-10 minutes since it requires blow-drying with a round brush to achieve the flipped, voluminous finish. The flip loses definition without daily styling effort, so this one demands genuine commitment. Monthly maintenance cost around $40-55. Difficulty rating: Advanced, the round-brush blow-dry technique takes practice to master.
Barber Talk — Say This To Your Barber
“I want a Vintage 70s Curtain Flip with the top left at 4-5 inches, sides kept fuller with just a light taper using a guard #4. Cut the fringe with a center part and layer it so it flips outward naturally on both sides. Keep volume through the crown rather than flattening it. Taper the beard into the fade at the jawline, keeping length at 10mm.”
If a daily blow-dry routine feels like too much of a commitment, the final style on this list wraps things up with the ultimate low-maintenance modern take on the curtain fringe.
13 of 13 — The Modern Mullet Curtain Fringe
Face Shape Match
Square faces close out this list perfectly with The Modern Mullet Curtain Fringe, since the layered length transition softens the jawline while the textured fringe adds curved movement across the forehead. Oval and diamond faces also wear the modern mullet shape confidently. Round faces should ask for shorter overall length and more graduated layering, since excess volume at the back combined with a full fringe can add unwanted width.
Grooming Kit
Clippers: Andis Master (Model 01557) for the shorter side sections. Trimmer/Outliner: Andis T-Outliner (Model 04710) for clean transition lines. Finishing Tools: wide-tooth comb for wave definition, Denman boar bristle brush for texture. Styling Product: sea salt spray combined with a light styling cream, a pea-sized amount for natural hold without stiffness. Maintenance: Viking Revolution beard oil for the stubble, applied daily.
Maintenance Level
Rated MEDIUM. Barbershop visits every 5-6 weeks to maintain the length transition between the shorter sides and longer back. Daily styling takes 5-6 minutes — scrunch product into damp hair and let the natural wave settle. The layered shape grows out gracefully, extending the modern mullet silhouette rather than losing it. Monthly maintenance cost around $35-45. Difficulty rating: Intermediate for home upkeep due to the layered structure.
Barber Talk — Say This To Your Barber
“I want a Modern Mullet Curtain Fringe with the top left at 3.5-4 inches, sides tapered with a guard #3 transitioning into longer layered length at the back and nape, around 5-6 inches. Cut the fringe with texturizing scissors for natural wave movement across the forehead. Keep the back soft and layered, not blunt. Blend the transition from sides to back gradually, no harsh lines.”
That wraps up the full list — from the softest romantic fringe to the boldest modern mullet, there’s a curtain bang style here to match every face shape, hair type, and maintenance routine.
